CARBIDE LARGE CONE GRINDING HEAD - MEDIUM
Medium-strength, cone-shaped sanding head. Milling head suitable for creating a straight-sided smooth surface. As it narrows and the nose is rounded, it can be properly guided along the skin. It can be used by both right- and left-handed people. It can also be used when filling artificial nails (all three material groups) and modern gel polish nails. The cooling of the head is excellent, with proper use it does not heat up.
The correct procedure for disinfecting metal tools:
- Clean the metal tool from organic contamination (dust, pieces of leather, etc.). You can clean it manually under lukewarm running water with a nail brush or with Crystal Nails XtremePRO Ultrasonic Cleaner.
- Wipe the device dry.
- Spray the device with a device disinfectant, CrystalSept Alcoholic Device, and Surface Disinfectant can be used for this purpose. The disinfectant should be applied to all used surfaces of the device. Wait 1-1.5 minutes, this is the time required for the disinfectant to take effect.
- Thoroughly rinse the disinfectant off the metal tool with running water.
- Wipe the device dry and put it in its storage place.
Never allow the disinfectant or water to dry on the device, as this may damage the quality of the device.
Attention! Never spray the hand unit of sanding machines with disinfectant, as this will cause the hand unit to malfunction, which is not covered by the warranty. You can find the correct cleaning of sanding machines in the user manual supplied with the machine.